Key Features
Suppression
“Suppression” is the main control of the plug-in. It determines how much the targeted frequency components are reduced to improve the tonal balance and clarity of your audio.

Intelligent Mix Assist
“Mix Assist” button enables the plug-in to capture and analyse the input and intelligently set the processing parameters. M-Clarity 2 will capture 3.5 seconds of audio for the analysis. Make sure to play the busiest part of your track when learning to get the best results.

Intensity
“Intensity” controls the scale of spectral peaks that M-Clarity 2 is targeting. At lower settings, the plug-in will focus on finer, narrower peaks, while higher settings will result in broader spectral adjustments.

Focus control
“Focus” controls how selective M-Clarity 2 is when suppressing spectral peaks. Higher “Focus” settings will result in only the strongest resonances being suppressed, while affecting weaker resonances less

Attack & Release
“Attack” and “Release” times determine the dynamic response of M-Clarity 2. “Attack” control delays the onset of spectral suppression, letting the initial transient to pass through unchanged.

Soft & Hard modes
“Hard” and “Soft” modes determine how gentle M-Clarity 2 is when spectrally shaping the audio. “Hard” mode results in precise and exact spectral corrections, while “Soft” mode uses spectral smoothing and shallower filter slopes for a more gentle approach.

‘diff’ and ‘filter’ buttons
“Diff” button enables you to listen to the difference between the processed and original signals. This allows you to audibly perceive the spectral corrections made by the plug-in, making it easier to fine-tune its parameters.

“Filter” button lets you listen to the adaptive processing range filter, so you can hear exactly what the plug-in is targeting. When “Filter” button is enabled, the “Frequency limit” slider visualisation also switches to show the adaptive filter shape. So you can simultaneously hear and see how the adaptive filter is adjusting to your track, and control its behaviour using the “Frequency limit” slider.

Makeup Gain & Auto-gain
“Make Up” controls the amount of clean gain applied to the processed signal. When you click “AUTO”, the plugin will measure the levels before and after processing, and after a few seconds it will set the “Make Up” parameter to an appropriate value to compensate the difference.

Frequency section limit
“Frequency limit” slider gives you control over M-Clarity 2’s adaptive processing range detection. The plugin is constantly analysing the audio and adjusts the processing range to target frequencies that appear too strong. You can choose where M-Clarity 2 is looking for these problematic frequencies by adjusting the “Frequency limit” slider. For example, you might want to exclude low frequencies when processing bass to preserve its low-end power.

Left & Right and Mid-Side controls
“Left-Right / Mid-Side” section of M-Clarity 2 allows you to switch processing between LR (left & right) and MS (mid-side) modes, and control the balance of the plug-in's effect on the stereo channels.

Input-output level metres
Input-Output Level Meters are visual displays that show the audio levels of the input and output signals before and after processing. These meters provide real-time feedback on the input and output levels, allowing you to monitor the changes in amplitude that occur during the spectral shaping process.

Scalable user interface
The interface scaling feature in M-Clarity 2 allows you to customise the size of the GUI to suit your preferences and optimise your workflow. With a range of scaling options available, from 80% to 150%, you can personalise the interface to match your visual and working style

Internal On/Off Switch
The plug-in features a dedicated bypass/on control, which allows for the swift enabling or bypassing of the effect. This user-friendly control is designed to help avoid potential clicks or audio artefacts that may occur when toggling the effect on or off directly within the DAW host.

Undo/redo options
The M-Clarity 2 plug-in comes equipped with the handy feature of built-in 'Undo' and 'Redo' options, providing added peace of mind while working on your audio processing. With these functions, you can easily revert to previous settings or redo changes that were made in error, saving time and eliminating the stress of potentially losing valuable adjustments.

A/B Switch
The A/B buttons provide a convenient way to compare different options and find the optimal setting for your audio processing needs. With just a click, you can easily switch between two different versions of the same processing chain and compare the results.

Tooltips
A handy 'tooltips' option

NFO
64-bit: (VST3, VST2, AAX)

Install & Replace (with patched)

home page: https://techivation.com/m-clarity/

DOWNLOAD HERE