ETABS Professional Course with 10 Story Building Design

MP4 | Video: h264, 1280x720 | Audio: AAC, 44.1 KHz, 2 ChLanguage: English | Duration: 4h 28m | Size: 3.4 GB

Complete 10 Stories Professioanl Building Analysis And Design Course with CSI Etabs 2020 for real project

What you'll learn

Understanding floor plan, Beam-Column Layout

How to Install And Configure Etabs (If needed)

Introduction to csi Etabs

Understanding about Materials Property as per Design Code

Define Materials Property as per Design Code

Details Understanding about Section Property as per Design Code

Define Section Property as per Design Code

Slab Thickness Calculation using Excel as per Design Code

Define Slab & Wall section as per Design Code

Define Mass Source as per Design Code

Define Load Pattern

Modify Load Case

Define Load Combination as per Design Code

Define & Modify Lateral Loads as per Design Code

Calculate Earthquake Load using Excel & find out Data for Etabs

Calculate Wind Load using Excel & find out Data for Etabs

Modeling of Structures as per Plan

Assign Loads ( FF, PW, LL, WL Etc.)

Static Analysis of Structures

Dynamic Analysis of Structures

Checking Model for Base Shear Check(Seismic Value)

Checking Model for sway limitation

Checking Model for P-Delta Check of a Building

Checking Model for Soft story

Checking Model for Torsional Irregularity

Checking Model for Story Drifts and Drift Ratio

Slab Design (WSD & USD) with Excel & Etabs

Beam Design with Excel & Etabs

Column Design with Excel & Etabs

Staircase Design with Excel & Etabs

Shear Wall Design with Excel & Etabs

Main Rebar Calculation with Excel from Etabs Results

Development length & Lapping Length Cal.

Beam Shear Rebar Calculation with Excel from Etabs Results

Beam Torsional Rebar Calculation with Excel from Etabs Results

Shear Wall Horizontal Rebar Calculation (ACI 318-14)

Shear Wall Vertical Rebar Calculation (ACI 318-14)

Requirements

Concept in RC Building Design

Concept in Structural Analysis

Need a Computer with installed Etabs

Basic knowledge of the codes limitations

Description

In this course, you will learn ETABS 2020 software. In this modern world as an eeer, we design analysis and explore a structure by using software to enhance the best quality structure. Because of accurate results and analysis by etabs building analysis and design software, we are able taking decisions properly to be the safe structure for this earth.

To design a safe structure you need to learn ETABS software properly from a professional eeer so that you can design a building perfectly with minimum cost by considering maximum safety.

With my professional experience, I have created this course with a proper sequence of steps of topics so that you can understand and learn the proper way. Although the course is focused on ETABS, the structural design concepts and steps are using ACI design code and ASCE loading code for references of parameters. The course focuses on the design practice and knowledge utilized on a professional level worldwide.

After completing this course you will get the following outcomes

Will be able to design and analyze a structure perfectly.

Will be able to take the critical decision to build a safe structure.

Will be able to find out reinforcement for detailing

And Many more...

What you will get with this course?

A.1. Earth Quake Analysis Excel As per ASCE 7-05

A.2. Wind load Analysis Excel As per ASCE 7-05

A.3. Vertical Earthquake Effect Cal. Excel As per ASCE 7-05

B1. P-Delta Check As per ASCE 7-05

B2. Base-Shear Check (Seismic Value) As per ASCE 7-05

B3. Drifts and sway limitation Check As per ASCE 7-05