Autodesk is the parent organization of AutoCAD. Autodesk has many products but it is not wrong to say that AutoCAD is one of the most used products of Autodesk globally. AutoCAD is used in different engineering fields like Civil, Mechanical, Architecture, Electrical, Electronics, etc. But this AutoCAD course is not designed from AutoCAD Mechanical or AutoCAD Electrical perspective. It means this AutoCAD course is limited to AutoCAD Civil, Architectural & Interior, or Exterior Designing fields only.

We will start this AutoCAD course with 'Introduction of AutoCAD Interface' & basic commands. We will cover so many 2D commands from the AutoCAD Drafting & Annotation workspace. Once we get enough knowledge of AutoCAD 2D commands then we will start working on the project & will create a complete ground+1 story 2D House Plan, along with Front Elevation & Sectional Elevation in AutoCAD. Also, we will see how to place different interior fixtures like furniture in AutoCAD. We will see how to print the drawing file in AutoCAD & how to use the external references in AutoCAD. After all this 2D work we will switch to the 3D modeling workspace & create the 3D Elevation of the plan & in the last, we will apply different materials & textures to the 3D Elevation. We will do the rendering of the 3D House as well in AutoCAD. By the end, you will have learned to do all this 2D & 3D work in AutoCAD without any external software. We will do all this work by the use of AutoCAD 2D & 3D commands.

This AutoCAD 2D & 3D course has a total of 86 video lectures with a total length of more than 14 hours. This AutoCAD 2D & 3D course is designed by assuming that you are using the AutoCAD for the very first time but if you already have some knowledge about AutoCAD or worked before in AutoCAD then you can skip those basic level lectures.