The EQP-1A based on Classic Program Equalizer from the ’60s, original EQ is renowned for its unique ability to boost and cut the same frequencies simultaneously, thereby creating a resonant shelf, the EQP-1A faithfully models the overbuilt transformers and complex tube amplifiers of the original hardware.

SPECIFICATIONS
- 20, 30, 60, 100 Hz shelf boost;
- 20, 30, 60, 100 Hz shelf attenuate;
- 3, 4, 5, 8, 10, 12, 16 kHz peak boost;
- 5, 10, 20 kHz shelf attenuate;
- On/Off Analog Saturation;
- Dedicated workflows for immersive formats;
- Process entire grouped speaker zones using Channel Linking;
- 4 independent equalizers in one.
Conceived and created for broadband equalization, the EQP-1A features four low boost/cut frequencies, three high-cut frequencies and seven HF boost points, along with a bandwidth control for shaping the high boost curve.

Units
This module allows you to select an equalizer from four available. The equalizers are arranged in series, this allows you to process channels with different equalizers settings.
For example: the first EQ is only the mid channel, the second EQ is only the side channel, the third Eq is the left and right channel. For multi-channel modes: the first Eq is only the left and right channels, the second EQ is the center channel, the third EQ is the LFE, etc.

You can rename Unit Buttons for ease of use. To rename the selected Unit button, right-click on the button.

In order to turn on the solo (listen) of the equalizer, double-click on the selected equalizer number. The equalizer in solo mode glows yellow, to exit solo mode, double-click again. For two-channel modes, only one equalizer can be solo mode. For multi-channel modes, one or more equalizers can be soloed.
To bypass Eq processing, press the selected equalizer number one click + shift. In bypass mode, the button will glow red.

You can also copy all equalizer settings to another equalizer. To do this, select the equalizer from which you want to copy the settings, then click on the copy button, then select the equalizer to which you want to copy the settings.

Input Routing
Input Routing lets you choose between 44 common channel setups, starting from Stereo up to 7.1.4 and 9.1.6. Simply select in the input routing module the channel setup that fits your track.

You can also create your own input routing profiles. 16 independent channels are available.

Click on the edit button next to the input routing selection display. Hold down the shift button and select the desired number of channels. Name selected channels in order. Then click save and name the profile.

Channels Selection
In this module, you can select (activate) the channels that the equalizer (unit) will process.

From nfo:
(64-bit: VST2, VST3, AAX)
(32-bit: VST2, VST3)

Install & replace with patched or, overwrite any older installed binary, with old-school drag'n'drop method.

home page: https://redrocksound.pro/en/eqp1a-pc/

DOWNLOAD HERE